- Frame: Complete jig-welded original style 4” round tube frame, 95” wheelbase chassis. Includes all mounts ready to accept small block Ford 302 and 351 engines.
- Comes powdercoated in gloss black
- Includes full cage and SCCA style rear crossbar in cockpit
- Body: Hand laid 3/16” laminate composite body includes hinged nose, main rear clip and doors with hinged steel-framed lexan rear window. Made with high quality vinylester resin.
- Driver and Passenger doors with moulded door liners and DOT door latches
- Front nose section with hinge kit. Includes gas strut piston supports, fasteners and under nose body mount supports
- Original style moulded-in hood scoop and fog light recesses
- Rear main body section comes with separate rivet-on rear spoiler.
- Original style deck scoop and footbox vents.
- Includes secondary body fasteners assembly.
- Adhesive backed foam weatherstrip
- Body mount fasteners
- Engine bay and rear trunk area seal, push on rubber bulb seal
- Rubber hood bumpers, small and large sizes
- Includes adjustable door hinges, latches and fasteners
- Includes an opening vintage rear window with steel-frame (powdercoated) perimeter support, hinge kit and vintage latch w/fasteners
- Includes glass front windscreen (DOT safety glass)
- Includes side window air scoops and framed sliding side windows
- Chassis Aluminium Panels: Includes over 20 precision CNC cut, pre-formed 6061-T6 aluminium panels for cockpit (floors, trans cover, and footboxes), rear boot area, and engine bay/firewall/splash guards.
- 1200 pre-packaged rivets 1/8” short & long, 3/16” short & long
- Complete cockpit aluminium with pre-formed footboxes, floors and transmission tunnel. Includes speedo cable block-off plate and transmission harness block off plates. Also includes aluminium dash w/cut-outs.
- Engine bay aluminium assembly with aluminium radiator duct surrounds and splash guards.
- Complete aluminium boot area.
- Complete Front Suspension: Unequal length control arms with coil-over shock suspension. Comes complete with all parts and fasteners.
- Koni brand high performance mono-tube, rod-end shock absorbers
- Coil-over kit for Koni shocks including spring hat, threaded seat and 500lb. black powdercoated performance springs
- Adjustable upper control arms with ball joints and fasteners
- Lower tubular control arms with ball joints and fasteners
- Grade-8 mounting hardware.
- Complete Rear Suspension: Independent rear suspension with new Ford Racing 8.8” differential with posi-traction and 3.55 gears. Comes with all fasteners and hardware required to install.
- Koni brand high performance mono-tube, rod-end shock absorbers
- Coil-over kit for Koni dampers including spring hat, threaded seat and 350lb. black powdercoated performance springs
- Factory Five tubular adjustable rear lower control arms, w/polyurethane bushings and fasteners
- Factory Five tubular rear upper control arms, w/polyurethane bushings and fasteners
- Complete Front/Rear Brake Kit: Pre-flared brake lines
- S/N 95 style spindles and spindle adapter bracket w/fasteners
- Front hubs, fasteners and dust covers
- Front Brakes, aluminium two piston PBR 11” front discs w/calipers, brake pads and fasteners
- Rear Brakes, 10.5” rear discs w/calipers, brake pads, caliper axle mount brackets, and fasteners.
- Master cylinders (listed in pedal box assembly), stainless braided brake lines, front and rear w/mount clips, banjo bolts and brake line mounting fasteners
- Pre-flared 3/16” brake lines and brake line T-adapter
- OEM Ford emergency brake handle, fasteners and cable
- Complete Steering System: Complete steering system using 15:1 manual rack from tie rod ends and fasteners to vintage steering wheel and badge. Collapsible design.
- 15:1 Aluminium manual steering rack w/inner and outer tie rod ends and fasteners
- Polyurethane steering rack bushings and fasteners
- Steering rack shaft adapter 9/16-26 spline
- Lower steering shaft
- Upper steering shaft, spring washers and fasteners
- 14” Vintage wood and aluminium steering wheel w/boss and F5R centre section and fasteners
- Steering bearings and hardware, including 1” flange bearing, pillow block bearing and fasteners
- Complete Fuel System/Parts: Based on OEM Ford Mustang fuel tank and system, this assembly provides everything from the gas cap to the lines, and is designed to work with carburettors or fuel injection systems. External fuel pump required.
- OEM Ford fuel tank w/mounting straps and hardware, vents, gaskets, pick-up and fuel level sending unit
- Fuel lines, flex lines, unions and barb connectors and filler neck
- Pre-flared fuel lines (1/4” and 5/16”) w/unions, barbs, hose clamps and high press flex lines and fasteners
- Aston LeMans style polished aluminium fuel cap with integral plastic OEM style pressure cap, gaskets, ground strap, fuel hose to tank extension w/fasteners.
- Fuel filter, connectors and hose clamps
- Complete Cooling System/Parts: Electric cooling fan, thermostat, relays and mounting kit w/hardware. Cooling system also includes stainless steel radiator hoses, and all necessary fasteners.
- Electric cooling fan, high flow 16” puller, w/mounting kit and connectors
- Aluminium radiator, in-line filler neck, and pressure cap
- Radiator mount kit and fasteners
- Stainless Steel radiator hose kit incl. adapter kit, fasteners and hose
- Overflow tank w/cap, hoses, hose clamps and mounting hardware
- Heater including all controls and trunking
- 185 degree thermostat switch and wiring
- Engine Accessories/Side Exhaust/Mounts: The Type 65 Complete kit is configured to accommodate the Ford 302 or 351W engines. Select from full tubular 2-into 1 headers and side exhaust, engine and transmission mounts.
- Polyurethane Engine/Transmission mounts for 302/351 w/fasteners
- Headers, with gaskets and fasteners. Select from
- 302 Headers, ceramic coated w/gaskets
- 351 Headers, ceramic coated w/gaskets
- 2-into-1 Side Exhaust, bare steel w/rubber hanger brackets, gaskets and fasteners
- Propshaft: The Coupe kit allows you to select from one of two available propshafts w/fasteners to match the engine/trans of your choice. Select one of the following…
- 28 spline 12.875” driveshaft for T-5 or Tremec 3550 transmissions
- 31 spline 12.875” driveshaft for Tremec TKO 500 and 600 transmissions
- Gauges and Dash and Electrical Assembly: End those wiring harness woes, integrated harness and electronic gauges are just the start of this massive assembly. Choose from vintage/replica or modern/ performance gauges to complement an authentic Coupe style dash. Complete assembly comes with aluminium dash, dash button, indicator lights, switches, and horn.
- Type 65 Coupe style aluminium dashboard w/fasteners
- Custom fit chassis wiring harness
- Ignition switch and F5R key, headlight switch, 3-position turn signal switch, starter solenoid and horns.
- Red, Green, Blue indicator dash lights
- Wiring harness mounting kit and hardware incl. Fuse panel mount
- On/Off switch, horn button, flasher and connectors
- Battery ground strap
- Speedometer sending unit, pigtail, fasteners and 3.55 gear
- Choose a complete set of 7 Autometer brand Ultra-Light electronic gauges, w/connectors, terminals and installation kit. Includes the following gauges:
- Speedometer
- Tachometer
- Oil Pressure Gauge
- Water Temperature Gauge
- Fuel Level Gauge
- Voltmeter
- Oil Temperature Gauge
OR Select
- Complete set of 7 vintage F5R Replica gauges w/connectors, terminals and installation kit includes
- Speedometer, reverse read
- Tachometer
- Oil Pressure Gauge
- Water Temperature Gauge
- Fuel Level Gauge
- Voltmeter
- Clock
- Interior Accessories: The 65 Coupe kit comes with all the interior accessories you need. Authentic seats, door latches, toggles, rear view mirror, and more complement the dash and gauges assembly for a full interior that is period correct. Check out this full list of standard parts and assemblies.
- Authentic design Coupe bucket seats, black vinyl w/fasteners
- 5-point Simpson Brand harnesses.
- Steel inner door frames and door handles, hinges, latches and leather check straps
- Emergency brake boot, black vinyl
- High-quality fabric headliner
- Authentic interior rear view mirror w/fasteners
- Full 7-gauge electronic F5R Vintage gauges or Autometer Ultra-Lite gauges (see description above in gauge assembly)
- Stainless steel shifter handle, shift knob, boot, polished ring and fasteners
- Exterior Accessories and Lighting: Along with the goodies on the inside of the car, the Coupe is period correct on the outside. Check out the standard exterior accessories that come with the complete Coupe kit.
- Wiper kit, complete original style cable-drive Lucas wiper kit includes motor, wheelbox, ferrules, arms, blades, dash switch, wiring and connections/fasteners
- Gas struts for tilt nose and rear hatch
- Authentic license plate light and bracket with fasteners
- High quality laser-cut aluminium mesh vents for nose/sides and rear brake ducts on tail
- Ceramic F5R nose badge
- Polished side view mirror, original style
- Original style headlamps (DOT) with buckets, halogen headlamps, trim rings, wiring pigtail, adjustment screws and fasteners
- Lexan headlight covers and fasteners
- Lexan rear ¼ side windows and fasteners
- Front turn signals, original style small amber indicators.
- Rear turn signals, original style red twin filament rear tail-lights
- Electrical Parts and Assemblies:
- Battery tray, j-bolts, cables and hold-downs with fasteners.
- Battery cable. Pre-cut, pre-assembled 4-gauge positive cable w/terminal covers.
- Insulated line clip hardware and fasteners
- Cable ties, wire loom and flex grommeting
- Complete Pedal Box Components:The complete Coupe kit utilizes a Wilwood brand pedal box w/fasteners and all the required parts
- Wllwood pedal box and mounting hardware
- Master Cylinders clutch quadrant, clutch cable, firewall cable adjuster, fasteners
- Accelerator pedal and accelerator cable. return spring and ball stud retainer
- Oil Filter Relocater/Alternate Drive Pulley Assemblies: A cool oil filter relocate kit comes with all hoses and hardware. Other parts to help 302 EFI and Mustang engine users include…
- Oil filter relocate mount with fittings, hoses, barbs and fasteners
- Spin-on engine block adapter
- Alternate drive pulley, spacer, pulley wheel and fasteners
- Air filter, conical
- Fan belt, six rib
- Type 65 Coupe Assembly Manual: Bound assembly manual that is over 200 pages long.
- Fasteners: Over 1500 top quality zinc plated, chrome and stainless steel USS and SAE fasteners, numbered and packed individually by assembly.
|
